putting ejuice in vape

5 Common Causes of a Leaking Vape and How to Fix Them

Every vaper will undoubtedly encounter this at some time throughout their vaping journey. It is a horrible sensation, particularly for inexperienced vapers who worry and stress out when their vape begins to squirt juice. It may be an uncomfortable sensation, but don't panic; leaky vapes are more frequent than you know. Typically, the solution is straightforward. Most of the time, it has nothing to do with your device and everything to do with how you use it, which is usually due to human error. This post will go over numerous reasons of leaking tanks and atomizers, as well as how to fix them.

Causes of Leaky Vape Tanks and Associated Solutions

1. Improper Filling of the Tank

Since most tanks are designed to store a particular quantity of juice, check to see if any is leaking from the air holes. Most tanks have a limit to how much juice they can store, and overfilling them will result in leaks. Make a note of how much juice your tank can contain; you may double-check the handbook or measurements for confirmation.

2. Improper Mod Placement

Sometimes, placing your mod in your pocket or bag along with your other items will cause rubbing. The result is usually a leaky vape tank. In order to avoid this, make sure that your vape mod is placed in a separate compartment in your bag. Also, ensure that your mod is properly wrapped in paper towels or bubble sheets to prevent it from scratching another item in the same bag.

3. Worn Out O-Rings

O-rings are small rubber gaskets or washers used sometimes in vaping. These are used to allow a certain amount of pressure for a mod. If the O-rings are worn out, they might not be able to endure pressure, causing leaking. This can be solved by simply buying a new O-ring and replacing it.

4. Inadequate Tightening

This is probably one of the most common reasons that causes leaking tanks. For this reason, it is very important to ensure that your tank is completely tightened. Just tightening it a little bit might not be enough. Some tanks might require a good amount of pressure applied to the tank to ensure that it is properly sealed. If you are unsure whether it is tightly sealed, then you can try to press down the tank where the juice is. If you are able to push it down without it bouncing right back up, then it is certainly sealed.

5. Faulty or old Coil

A faulty or old coil can be the culprit of leaking tanks. If your tank is dripping even when you haven't been using the tank, then this might be the problem. A leaky tank can be an indication that the coil is not working properly, or is just too old. A new coil might fix this problem, so make sure to check this out.


There you have it, five causes of leaking tanks and vape mods, and their solutions. Making sure that your vape mods and tanks are properly sealed will greatly help in preventing leaking. While some people might not notice this, it is still a problem that needs to be addressed. By following these steps, you will be sure to have a leak-free vaping experience.

Are you looking for a quality online vape shop in the UK? Look no further with V8PR. We are the leading provider of vape kits in the market today! We have over a thousand branded vape equipment and supplies so you can choose what "hits" for you. Order from us today!