Experienced vapers typically consider three crucial factors while vaping. These factors are throat hit, vapour density, and flavour.
Similar to smoking, vaping is an experience that differs depending on the person, so it may take a while to find a combination that works for you.
Now, if you're new to vaping, you're likely at a loss right now. Not to fret, since this article will walk you through the different components that affect throat hit, vapour density, and flavour.
What Are the Different Components to Consider While Vaping?
Whether you're a seasoned vaper or a complete newbie, the answer to this question is the same.
The main components to consider while vaping are your e-liquid, coil or atomiser, and device.
Different combinations of the three of these factors create the vaping experiences we have today.
E-liquids are the primary flavouring agent in vaping. You can find these in all vape shops, and they come in a wide range of flavours and nicotine levels.
E-liquids also vary in Vegetable Glycerin (VG) to Propylene Glycol (PG) ratio.
VG ratio makes your e-liquid thicker and heavier. If you want thick vapour, you may opt for higher VG content. On the other hand, vapers who prefer a milder taste and a better flavour mix may find themselves leaning towards PG.
2. Coil or Atomiser
The next basic component is your coil or atomiser, which heats the e-liquid and turns it into vapour. Coils come in all sorts of shapes, sizes, and materials, so it's essential to look into their specifications before purchasing one from a vape shop.
In addition, two popular coil types are the standard and sub-ohm coil. It's possible to alter these coils to create differing experiences.
- Standard Coil (1.2-1.6 ohms) - This is the most common type of vape coil. The standard e-cig coil is best for beginners who don't want to deal with the intricacies of using different coils.
- Sub-Ohm Coil (0.6 - 2 ohms) - These coils are the go-to of most experienced vapers who have a device designed for sub-ohm coils.
You may need to use the standard coils at a lower wattage to maximise the heat, but you can get more vapour from sub-ohm coils by increasing the wattage.
The last component you need to consider is your device. This includes a battery, a tank, and a mouthpiece.
Batteries are the power source for your e-cigarette, and different batteries have various sizes and voltages. High-drain batteries usually have large voltages and higher capacities, making them suitable for sub-ohm setups.
For example, if you have a 2500 mAh battery and a 0.5-ohm coil, you'll need to use a higher wattage to get your desired vape. If you use a 3.0-ohm coil, you can reduce the wattage and get the same experience. Generally, higher wattage means more vapour, more throat hits, and more flavour.
How Can You Make the Most Out of Your Vape Device?
A quick way to enhance your vape device use is to check your coils. They must be clean, and nothing is obstructing the air holes.
You also need to prime the coils regularly, usually with a few drops of e-liquid. Also, it's best to prime the wick and coil before using it for the first time and after a day of regular vaping. Priming means filling a tank with a few drops of e-liquid and letting it sit for a few minutes before you use your vape device.
Aside from priming, you should also take the time to change your coil regularly and keep your tank clean. Neglecting either can affect the performance of your vape and the life of your coils. Not to mention the fact that you'll be inhaling unwanted and potentially harmful contaminants.
Now that you have a better understanding of what you should consider while vaping, you can try a few different setups to find the right combination for you.
There's no doubt that vaping is a complex experience. However, it's also rewarding once you find that perfect setup.
If you're looking for a trustworthy vape shop in the UK that carries vape kits, e-juice, tanks, and other vape products and mods, consider checking out V8PR. Our products cater to experienced and newbie vapers alike. Shop now!