There's an important step to vaping that you might be missing if you're new: the priming of coils prior to actual use. Priming helps to prevent damage and facilitates better usage of a vape. It is also crucial for safety, as much as adding e-liquid the right way and preventing device overheating.
Understandably, the intricacy of coils can be mind-boggling. However, it's not rocket science. It’s just a matter of being familiar with the workings of the coil.
Vape coils have a wicking material, usually made from cotton, and wire; the coil wraps around the wicking material. That's what causes it to soak up e-liquid and heat up once you turn your device on—the hotter the coil, the hotter the wicking material. In turn, more and more vapour gets produced.
When coils are switched out, the new one becomes open to burning the wicking material due to dryness. If the dry cotton gets hit with direct heat after insertion, it will definitely burn or become scorched. Both parts are vital and generally do not work without the other. It's key to keep both your wicking material and wire in good shape to have a continuously good vaping experience.
It's safe to say that coils require a little extra attention. The changing should be done on a regular basis in order for burnout to be prevented; heavy vapers should do this weekly. However, it can also take as long as a whole month to pass before the need for coils to be switched out arises. That said, any sign of a burnt coil should not be ignored. In those cases, you should replace your coil immediately.
Burnt coils taste as much, and the flavour is wholly unpleasant. They can lead to:
- Vape coil burning wick material directly
- Vape juice flavours being affected,
There are several kinds of coils available on the market. Each one works differently and has results that vary. Coils of high and low resistance alike are already being associated with a number of vaping styles. High resistance coils produce small vapour clouds when used at a lower wattage; low resistance coils need more power, usually with Sub Ohm vaping.
Priming Your Coil
This may sound like a complicated or multi-step process, but it's really not. All it takes is a good soak so that e-liquid is well and properly absorbed into the cotton/wicking material before the device is heated up for use. A few drops of e-liquid directly onto the wick before installation can go a long way. Another way to do it is waiting a while after the coil is inserted into a filled vape tank. In some cases, puffing without activating the power helps to coat the wick.
Remember: Dry cotton burns, wet cotton doesn't!
Priming the coil before use is a key part of caring for any vape device. Burnt coils largely occur due to dryness, so the key is prevention. Add a few drops of e-liquid on the wick before insertion or just wait a while after inserting the coil into a filled vape tank.
Are you trying to find an online vape shop in the UK? Contact V8PR today! We’re a premium vape supplier with over a thousand products. Shop now!